create New Value with ibosn systems

DRSMDA5D3X CPU 모듈



DRSMDA5D3X
Cortex-A5
DDRAM : 128MB
NAND Flash : 1Gb
SFlash : 16Mb
3.3V전원
CPU
ATSAMA5D31 support (ATMEL cpu).
ATSAMA5D32 support (ATMEL cpu).
ATSAMA5D33 support (ATMEL cpu).
ATSAMA5D34 support (ATMEL cpu).
ATSAMA5D35 support (ATMEL cpu).

MEMORY
DDR2 RAM, SerialFlash, NAND FLASH.





upgrade:

USB memory stick을 이용하여 빠르게 업그레이들 할 수 있읍니다.

부팅 및 커널을 직접 업그레이드 할 수 있으며, 어플리케이션들, 미들웨어 및 드라이버들을 손쉽게 업그레이드할 수 있읍니다.

dooroo-framework:

“dooroo-framework”는 dooroos.realtime/dooroos.embedded 사용자가 복잡한 c-프로그램을 하지 않고, 사용자의 GUI 및 제어, 통신 기능등을 갖는 어플리케이션을 자동생성시켜주는 소프트웨어 입니다.

PC 툴(dooroo-framework editor, dooroo-framework node editor)는 사용자가 필요한 어플리케이션을 노드의 배치와 연결만으로 생성시키는 도구입니다. 복잡한 프로그램없이 원하는 어플리케이션을 제작할 수 있읍니다. 고유의 기능을 추가하고 싶을 경우 plugins에 노드(node)를 추가로 삽입하게 되면, 기능을 확장할 수도 있습니다.

read more...


Tool for writing the dooroos image.
sam-ba version 2.15 for dooroos image writing.
sam-ba version 2.15 upgrade library

dooroos binary image
serial-flash dooroos image for the 10.4inch LCD.
serial-flash dooroos image for the 7inch LCD.

port
port
The all the files and directories should be copied to the dooroos install directory. this file has the porting ports without the driver files. (ex. c:\)


drivers and dlls
e
default drivers and dlls.
The all the files and directories should be copied to the nand-flash filesystem. if you connect with PC by usb cable, you can access to the nand-flash filesystem.
buz driver source.
This buzzer driver generate the pwm. the internal timer controller is used.
pwm driver source.
This pwm driver generate the pwm pulse. the internal pwm controller is used.
adc driver source.
The internal adc controller is used.
adc with touch driver source.
The internal spi controller is used.
MCP3302/3304 spi-adc driver source.
The internal spi controller is used.
lan driver source.
The internal lan controller is used.
giga lan driver source.
The internal giga lan controller is used.
RTC driver source.
The internal twi(I2C) controller is used.
LED driver source.
The internal gpio controller is used.
keyboard driver source.
The internal gpio controller is used.
gpio driver source.
The internal gpio controller is used.
touch driver source.
The internal touch controller is used.
display driver source.
The internal display controller is used.
camera driver source.
The internal camera controller is used.
sound(wave) driver source of alc5621.
The i2s controller is used.
sound(wave) driver source of wm8960.
The i2s controller is used.

etc
j-boot for 7-inch LCD connected to PA[0~23].
This j-boot is for the 7-inch LCD : RGB signal is connected to PA[0~23].
Upgrade by USB memory source code.
This program and source code are for the upgrade of the CPU module by USB memory. The manager can upgrade the system anywere, anytime.
Upgrade by USB memory binray image.
The contents of this file shoud be copied to usb memory. Plug-in the usb memory to the Target board, and press the reset, the program in the usb memory is executed.